L46-150 TC-CE
- No. of Colours :
4 colours
- Automation :
Semi-Automatic
- Width :
150 mm
- Print :
PVC, OPP, Adhesive Paper + Option for Non-Adhesive
- Description
- Features
The L46-150 TC-CE model is a semi-automatic flexographic printing press for the 4-colour printing of adhesive tape, the tape cutting and rewinding in preset widths and lengths. Working cycle: the machine unwinds, Corona treats, prints, cuts and rewinds the tape; it slows down and turns automatically the rewind turrets when the present length is reached. With an optional device, the machine can also print non adhesive material (non-adhesive paper, non-adhesive OPP, aluminium and reinforced paper). Capable print: PVC, OPP, ADHESIVE PAPER (Pre-Treated, Solvent, Hot-Melt, Acrylic Water & Solvent Basis).
- 4 colors
- 3″ mechanical unwind mandrel with dry clutch
- Tefloned central impression drum (standard) or ceramic central impression drum (on demand)
- Width and length roll 150 mm – max. diameter 420 mm
- Slitting device by razor blades
- Set of spacers for slitting blade holders setting: 12 mm – 15 mm – 19 mm – 25 mm – 30 mm – 38 mm
- Corona Treatment
- 4 hot air drying tunnels with electric resistors
- Speed Control and Adjustment from 0 to 160 m/min by inverter
- Anti-Accident Protection Preset for the exhaustion of solvents
- 4 Ventilation Systems between each printing station
- Exhaust System (5 suction fans)
- Printed Tape rewinding on change-over turrets
- Primer Station
- Release Station
- Air Consumption: 360-400 l/m (5 bar)